For overseas e-bike assemblers, parts distributors and aftermarket buyers, the handlebar is more than a control point. It is where rider feel, safety and brand quality meet. A throttle grip that slips, a cable clamp that vibrates loose or a clamp ring that does not seat correctly can create assembly delays, returns and warranty costs. Anhui Youliang Hardware Products Co., Ltd. focuses on these small but critical components: e-bike handlebar aluminum rings, open clamp rings, galvanized special-shaped brackets and black stamped metal clips.
A Focused Range for E-Bike Handlebar and Cable Assembly
Instead of spreading across unrelated hardware categories, Youliang specializes in the fastening and locating parts that sit around the handlebar, throttle grip, cable routes and frame mounting points. The range is designed for two-wheel electric motorcycles, leisure scooters, electric tricycles and domestic-standard e-bikes.
Internally threaded aluminum rings are CNC turned from national-standard aluminum alloy. They feature precision internal threading, side positioning holes and tight dimensional tolerances. These rings work as throttle grip base locking components, nesting over the throttle shaft to keep the grip assembly stable. Common inner diameter options include 22 mm, 24 mm and 26 mm, with non-standard sizes available through mold development.
Open U-type aluminum clamp rings are formed from extruded aluminum alloy. The open elastic structure applies even clamping force around the handlebar or throttle grip outer ring, helping prevent loosening and slipping. Polished surfaces support oxidation resistance. Standard models suit common 22 mm and 25 mm handlebar tubing, and custom sizes can be developed for non-standard tubes.
Galvanized special-shaped clip brackets are bent and stamped from cold-rolled steel plate with a hot-dip galvanized coating. Dual mounting holes and a curved body make them suitable for wire harness and brake cable fastening on handlebar stems and frame positions. Left and right matching versions are available for different frame opening layouts.
Black stamped metal clips use cold-rolled iron plate with black electrophoretic coating. One-piece stamping, wear-resistant and rust-resistant finish, and reinforced rivet holes support long-term assembly use. Lug-type clips are used for switch wiring harness fixing, while window-type clips work as throttle cable limiting clips. Hole spacing and curvature can be adjusted to customer drawings.
Perforated aluminum rings complete the lineup for buyers who need locating or fastening rings with side holes. Like the threaded ring family, they can be produced in standard or custom dimensions based on drawings.
Precision Manufacturing, Not Just Trading
Youliang is an original manufacturer based in Lingbi County, Suzhou City, Anhui Province. The self-owned factory includes a 1,000-square-meter production floor, automated CNC lathes and stamping production lines. In-house operations cover independent mold development, raw material processing and finished product inspection. This integrated setup helps control dimensional consistency from the first sample to repeat bulk orders.
For buyers, the practical benefit is a shorter communication chain. When a distributor needs a different inner diameter, side hole position, material grade or surface finish, the requirement can be reviewed directly against the drawing and production process. The factory supports OEM customization from customer drawings or samples, including small-batch sampling and large-volume procurement for complete vehicle assembly. Materials can be switched among aluminum, iron and stainless steel, and dimensions can be modified on demand.
Production capacity is supported by automated lines with ample daily output for monthly bulk stocking by assembly plants. Lead times are planned around mold readiness, material preparation and inspection steps rather than promised in vague terms. For international buyers, this matters because e-bike programs often combine forecast-based volume with color, model and market-specific variations.
Applications That Demand a Reliable Fit
These components are not universal afterthoughts. They are installed at points where vibration, repeated throttle use and cable movement are constant. A well-fitted aluminum ring helps keep the throttle grip base locked to the shaft. An open clamp ring helps hold the grip outer ring without uneven pressure. A galvanized bracket keeps brake lines and wiring harnesses routed away from moving parts. A black stamped clip keeps switch leads and throttle cables in position.
Typical applications include two-wheel electric motorcycles, leisure scooters, electric tricycles, domestic-standard e-bikes and e-motorcycle assembly. Distributors can use the range for repair and replacement markets, while OEM buyers can specify parts for new models. Because the factory already supplies major Chinese e-bike brands such as Segway-Ninebot, AIMA, Yadea and TAILG, the production process is familiar with the fit and finish expectations of high-volume vehicle assembly. The company reports coverage of two-thirds of China's domestic market and exports to Southeast Asia, the Middle East, Europe, America and other regions.
Industry Insight: Consolidate the Small Parts That Cause Big Delays
In e-bike sourcing, buyers often focus on motors, batteries and frames. Yet handlebar hardware can create disproportionate delays when a clamp ring is slightly out of tolerance, a bracket hole pattern does not match the frame, or a surface finish fails in humid storage. Consolidating these small parts with a specialist manufacturer reduces the number of suppliers to coordinate and makes it easier to trace a fit issue back to the drawing, mold or inspection step.
For distributors, a focused hardware supplier also simplifies inventory planning. Common sizes such as 22 mm, 24 mm, 26 mm, 22 mm and 25 mm handlebar fits can cover a large share of routine demand, while custom parts support private-label programs and regional models. For OEMs, the ability to move from drawing to sample to mass production within one factory helps keep model changes on schedule.
OEM and Customization Without Complexity
Youliang's customization process is built around clear inputs: drawings or samples, target dimensions, material choice, surface treatment and order volume. The factory can develop molds, produce samples and then move to mass production. Common customizations include non-standard inner diameters, thread specifications, side hole positions, hole spacing, curvature, left/right bracket pairs and material switches among stainless steel, iron and aluminum.
This flexibility is useful for buyers who need a standard replacement part with a small change, as well as for brands developing a new handlebar assembly. The goal is not to overcomplicate the specification. It is to define the fit, function and finish clearly, then produce consistently.
Work With a Specialist on Your Next Hardware Order
If you are sourcing e-bike handlebar rings, throttle grip clamps, cable brackets or stamped clips, send your drawings, samples or target specifications to the Youliang team. Include the required material, surface finish, dimensions, expected order volume and destination market so the factory can confirm the most suitable production route.
Contact: Jiang Yu
Company: Anhui Youliang Hardware Products Co., Ltd.
Address: Lingbi County, Suzhou City, Anhui Province, China
Postal code: 234214
Phone: 19034795217
Email: jiangyu19980611@outlook.com
Website: http://www.youliangwj.com/
For distributors and OEM buyers, the next step is simple: share one drawing or one sample and define the fit requirement. A focused hardware partner can turn that detail into a repeatable production part.
