The Hisense C2 Ultra is an RGB triple-laser projector with a 0.9–1.5:1 throw ratio, not an ultra-short-throw laser TV. For a 120-inch retractable setup, compare SCREEN PRO 3C when the room is dark or light-controlled and speakers will not sit behind the image. If significant ambient light reaches the screen, evaluate an appropriate non-UST ALR surface after checking its placement requirements against your actual setup.
Start with the C2 Ultra’s actual throw ratio
Moving the C2 Ultra closer to a wall does not turn it into a UST projector or change its light source. Do not default to a UST ALR screen simply because the projector carries the Hisense name.
Determine your actual throw ratio from the projection distance and image width. Then check the proposed screen material’s minimum throw ratio, projector-height limits and viewing geometry. The projector’s optical zoom range does not establish compatibility with every directional ALR material across that range.
Compare 3C when room light is controlled
3C is a matte grey, non-ALR material designed to help reduce visible RGB-laser speckle. It is not acoustically transparent, so it is relevant when speakers remain outside the image area.
Speckle reduction is not guaranteed elimination. Compare visible speckle, brightness and texture with your actual C2 Ultra, familiar content and normal seating position. A grey screen is not automatically the best choice for every room.
If speakers must sit behind the image, evaluate an appropriate acoustically transparent finished screen instead.
Evaluate ambient light separately
3C does not replace directional ambient-light rejection. If daylight or room lighting washes out the image, first establish where that light reaches the screen and how much can be controlled.
A non-UST ALR screen may be worth evaluating, but its material and installation limits must suit the C2 Ultra’s actual position. Do not assume that every product described as “long-throw ALR” will work at the shortest end of the projector’s zoom range.
ALR and laser-speckle control are separate properties. Neither should be treated as a guarantee of the other.
Match the material to a retractable finished screen
Once the material fits the room, choose how the screen should retract:
-
SCREEN PRO 3C floor-rising screen: rises from a housing below the image. Check the complete housing, deployment path, raised height and service access.
-
SCREEN PRO 3C motorized tension drop-down screen: lowers from an overhead housing. Confirm mounting support, image position, power access and clearance throughout operation.
These are different finished-screen structures. Confirm the exact 120-inch configuration and matching drawing before ordering.
Test the material and confirm the installation
Use SCREEN PRO’s RGB laser-speckle testing guide to plan a consistent comparison. An appropriate material sample can help assess speckle, brightness and texture; it cannot confirm full-screen flatness, housing fit or mechanism operation.
For a model-specific recommendation, ask SCREEN PRO to review your C2 Ultra setup. Include room photos, projection distance, image width, viewing distance, speaker placement, preferred retractable structure and delivery country. Request confirmation of the exact material, finished-screen configuration and installation drawing before buying.
https://screenproscreens.com/
SCREEN PRO


