Rear support bars can conflict with behind-screen speakers if their locations are not planned together. Acoustic transparency describes the screen material; the frame and its rigid supports still need a separate fit check. Before ordering a 165-inch fixed-frame screen, confirm the rear-frame layout, the supplied backing and the actual speaker-to-screen clearance.

Rear-frame construction reference. Confirm support bars, backing and speaker clearance for the exact configuration ordered.
Keep three items separate
-
Rear support bars brace the frame. Their number, width and positions depend on the exact screen configuration.
-
Acoustic backing is a separate material layer. Confirm whether it is required, what is supplied and how it will be mounted.
-
Speaker-to-screen clearance is the installed separation between the speaker’s specified front reference point and the screen layers. Nominal frame depth does not establish that distance.
Do not assume that every complete TW or 3W screen includes the same backing, or that every fabric-only order excludes it. Confirm the exact order specification.
Request the matching rear-frame drawing
Ask for the drawing for the selected size, aspect ratio and frame design. It should identify the viewing area, outside frame dimensions, support bars, mounting brackets and relevant protruding parts.
Check how bar positions are measured: from the outer frame or the viewing area, and to the bar’s centre or edge. A centreline without the bar width cannot establish the remaining edge clearance.
Frame bracing and fabric tensioning are related parts of the assembly, but a photograph of support bars does not prove full-screen flatness.
Compare the drawing with the real speaker layout
Mark the left, centre and right speaker positions on the same front-view plan. Include driver or grille areas, mounting hardware and installation height, rather than checking only speaker centre points.
For in-wall speakers, identify the front face, grille and any protruding trim. The depth of the speaker box inside the wall is different from the free space in front of it. For freestanding speakers, include the complete cabinet and its installed position.
If a support conflicts with the layout, request an engineering-approved solution before ordering. Do not remove or relocate required supports independently.
Confirm backing and acoustic clearance together
Where backing is proposed, confirm that its material and mounting suit the acoustic installation. Black colour alone does not establish acoustic transparency.
The appropriate separation depends on the speakers, screen material, backing and installation. Use the speaker manufacturer’s guidance and the confirmed screen configuration; do not apply one universal gap to every 165-inch screen.
A material swatch can help compare appearance, but it cannot verify bar clearance or the complete installed sound system.
Confirm the finished-screen configuration
SCREEN PRO’s white woven TW and grey woven 3W are acoustically transparent material options. Material selection should still account for the projector, room lighting and brightness requirements.
The SCREEN PRO TW fixed-frame listing includes a 165-inch option. Confirm the selected frame design, rear supports and backing for the configuration ordered.
To resolve the layout before purchase, ask SCREEN PRO to review your screen and LCR plan. Send the intended size and aspect ratio, speaker models, front-view positions, wall arrangement and relevant photos. Request the matching frame drawing and written confirmation of the supplied configuration before finalizing the order.
https://screenproscreens.com/
SCREEN PRO
